Wavtech link2 2ch LOC w/ Load Sense

Description: Product highlightsactive 2-channel line output converter designed to work with factory systems provides up to 10Vrms output speaker-level inputs only selectable speaker-level input sensitivity (20V or 40V) via internal jumper auto turn-on via DC offset or audio detect gain control and clip light 12-volt turn-on lead output aluminum chassis speaker-level inputs feature load resistance to prevent factory stereo shut-down optional plug-in parallel load resistors available for vehicles like some newer Chrysler vehicles that need less resistance for the factory stereo's load-sensing to work wiring, fuse, and hardware not included with device 18-gauge power and ground leads and a 1-amp fuse recommended dimensions (not including terminals and jacks): 2-1/2"W x 1-1/8"H x 2-15/16"D warranty: 1 year What's in the box2-Channel line output converter 2 Phoenix terminals (installed) 2 Mounting tabs (installed) Two ½" Screws Ground ring terminal Owner's manual About this itemWritten by Crutchfield's Buck PomerantzGetting a strong clean signal from a factory stereo Your aftermarket processors and amplifiers need clean and robust line-level input signals, especially when getting them from a factory radio's speaker outputs. Wvtech's link2 line output converter can produce up to 10 volts of output — plenty enough for your aftermarket gear to work with. Works with factory amps too Those speaker-level inputs can handle up to 40 volts, the equivalent of 400 watts, so you can use one in a premium system with a factory amplifier. This way, you retain all your vehicle's factory audio options and warnings. The link2's gain control and clip light help you keep the signal level under control and distortion-free.

Price: 69.95 USD

Location: Charlottesville, Virginia

End Time: 2024-02-27T04:11:13.000Z

Shipping Cost: 0 USD