Description: Features of your 12" Westcoast-Mxtbars Fits all Harleys that utilize TBW (Throttle by Wire) - late model baggers, dyna, softail, etc. Ask your chosen professional installer if you are unsure. Metal: 1080 mild gauge steel tubingCoating:Gloss Black Powdercoat Top Crossbar:- 5 1/2" spread in the middle of the handlebar. Then bends and rises up 2" and then the 1-1/4" tubing is swaged (tapered) down to 1"diameter.(All one piece) (Fits conventional controls)- Both sides have 5/8" Holes punched for internal wiring and Bored out for heated grips- Cross width is 31 1/2" across and pullback is 3 1/2".- Your Wrist angle will be at a 18 degree angle Cross bar is welded to sit flat on a 28 degree rake- The (2) - 3/4" holes in middle of the bar are made to be centered for the 3 1/2 spacing of the risers.- Throttle By wire (Fly by wire) on throttle side.- Heated grips compatible Risers:- All cuts and holes are made- 3 1/2" spacing between risers. (Fits conventional top triple tree clamps)- 5/8" oval holes are 1 7/8" up from the bottom for internal wiring. Riser Bungs:- These bungs are designed to be a steel 1 piece, 3 tier design. First tier fits inside the 1 1/4" tubing. Second tier meets flush with the bottom of the risers and is TIG welded bonding the bung to the riser. The third tier widens to 1 1/2" and is hollowed out 1/4" deep. This eliminates the need of a traditional washer setup, the handlebar bushing fits perfectly inside the custom bung.
Price: 175.96 USD
Location: Argyle, Texas
End Time: 2024-12-22T05:16:50.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Returns Accepted: ReturnsNotAccepted
Brand: West Coast T Bars
