Description: White Oak Tiger Quarter Flake Figure wood veneer 24" x 48" with wood backer 1/25" thickness 2' x 4'. AAA quality grade. This grade has the best flake tiger figuring compared to AA and A grades. Expected to cover the sheet fairly consistently and uniformly, but not perfectly (75-100%). Product is graded very carefully, but is is somewhat subjective and this has to be understood and some leeway given in expectation. Photos are representative and product will vary in color and grain. Wood backer is sometimes preferred over paper backer due to thickness, ability to cover minor surface imperfections and bonding strength. Wood veneer will darken when finished as shown is some photos. Grain runs longer direction and figuring in the shorter direction (across the sheet). Ships rolled in long narrow box with application instructions. Other sizes, backers raw veneer and edgebanding are available. Very popular and successful product. Trust the experience, knowledge, and reputation that has served the wood industry and novices since 1995.About pictures: Most pictures have been temporarily wet on the lower portion of the veneer to show what the grain may look like when finish is added. Color adjustments have been made to show the color as best as is possible. It is impossible to get photos exactly correct in color, but we have made an effort to do so. Backed products come with complete application instructions that are simple and clear. For raw veneer or un-backed products, we suggest using the Internet to see what advice is available as opinions vary on the best way to handle that product. Below is general information for most of our products. Make sure you check the listing to see which applies to the above product in particular. Thickness: (will not always be exactly correct, but relatively close) Paper-backed veneers = 1/40” Wood-backed veneers = 1/25” Raw plain veneer with no backing = 1/32”-1/42” How to cut: generally cut with a razor/box knife or similar tools and some type of straight edge. How to apply: Paper-backed and wood-backed veneers are generally applied with contact cement. Raw plain veneer is applied with white or yellow wood glue and must have pressure applied while drying. How to finish: most any conventional finishing products can be used with veneer that is applied correctly. Disclaimer: Sometimes veneers have minor splits or tears in them. These are usually taped or repaired in some manner and shouldn’t impact overall quality or satisfaction. There may also be some minor wood filler used to fill cracks and other crevices that may exist. Wood products are rarely perfect and some consideration of that may be needed occasionally since this is a natural product and is rarely ever perfect. Some sanding is usually required before finishing to prepare the surface for a finish and occasionally to remove veneer tape, splice glue, or some other imperfection.
Price: 80 USD
Location: Louisville, Kentucky
End Time: 2024-02-04T18:03:32.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Veneer Cut: Quarter Cut
Item Type: Veneer Sheet
Veneer Type: Wood on Wood/2-Ply
Model: Wood veneer Oak White Rift roll flexible flake Q/C
Oak White Quarter Cut veneer Flake Tiger: Backer back backing figure flakey sheet roll Q/C
MPN: Does Not Apply
Wood Type: Oak White Flake
Brand: Quarter White Oak wood veneer sheet on wood backer
