Wireless Bluetooth 12V Battery Monitor Battery Tester 12V Cranking Charging Test

Description: Real-time display of battery health, temperature, power and voltage. Automatic test of craking and charging system. Built-in alarm function. An alarm tone will sound due to abnormal body temperature, low battery, low voltage, startup system failure and charging system failure. The display is powered by lithium battery and solar panel, no cable, no installation required. Type-C fast charge battery can be used when the battery power is low. Adopt stable 433MHz wireless transmission technology. Built-in vibration sensor. The device will automatically turn on when the vehicle is driving, move a little, will automatically turn off after a long time to stop. Built-in fuse and reverse connection protection. Professional algorithm, the longer the connection time, the more accurate the result. Ancel BM200 Pro Functional advantages ✅12V Lead-Acid Battery Monitor: ANCEL BM200 Pro is a 12V lead-acid battery tester, which consists of a wireless host unit and a wireless display. It can display the voltage, power, temperature and health of the battery in real time, and automatically test the starting and charging systems of the vehicle. When the temperature is abnormal, low power, low voltage, startup system failure, charging system exceeds the normal range, the wireless display will automatically emit alarm sound to remind. ✅433MHZ Radio Frequency Transmission: Compared with Bluetooth, BM 200 Pro battery monitor adapt 433MHz RF technology has the advantages of better penetration ability, longer signal transmission distance( It can reach tens of meters), more energy saving and less signal interference, which is suitable for data transmission in any complex environment. Such as basement, stairwell, rural areas and any other places, etc.You do not need to connect to the network,phone and install the app. ✅Energy Saving And Environmental Protection: The car battery tester display screen adopts two modes of power supply:Type-C fast charging and solar panel. The solar panel powers and charges the device so that it does not need to be charged as often.The use of solar cells are more environmentally friendly, energy efficient, and can work independently of the grid.This is very useful for some remote areas or wilderness adventure and other scenarios.High economy can reduce energy costs. ✅Build-In Vibration Sensor: battery load tester with automatic on/off function. when BM200 Pro feels the vibration, it will automatically turn on and keep running for 5 minutes. If the device feels the vibration again within 5 minutes,it will continue to keep the power on. if no vibration occurs within 5 minutes,then BM200 Pro will automatically go into standby. Helping users to eliminate the step of turning off the device when it is not needed, thus improving the convenience of using the device. ✅Safety Protection & Wide Compatibility: Built-in fuse and reverse connection protection, unlike other car battery tester automotive, our ANCEL BM200 Pro digital car battery load tester all batteries are equipped with 100% high quality safety copper clips with reverse polarity protection and spark protection for stable and safe connection during testing. Suitable for all 12V lead-acid batteries, such as: cars, motorcycles, trucks, RVs, ATVs, suv's, boats, yachts, lawn mowers, etc. ✅Easy Operation And Battery Health Status Indicator: You only need to connect the negative (black) connector firmly to the negative battery port and the positive (red) connector firmly to the positive battery port. Place the LCD display in front of the windshield to view battery health data such as: voltage, power percentage, temperature, charging system test, starting system test, health percentage, etc. Battery status can also be displayed by the 9 LED light on top of the wireless host unit. ✅Type-C charging/solar powered ✅ high temperature/low voltage alarm warning ✅ Support real-time data viewing, ANCEL BM200 PRO Car Battery Tester Battery Monitor display can display 1. Battery Health Percentage 2.Battery Test results 3.Start test alert 4. Charge test alert 5.Temperature 6. Charging percentage 7.Voltage 8.Starting voltage 9.RF signal 10. Battery test results 🔔 Warm Tips: ❗ ANCEL BM200 Pro only supports monitoring of 12v lead-acid battery; ❗Ensure that the device is securely installed for the first time. Loose installation may cause abnormal data capture and display. At the same time, when there is a 433MHZ RF Transmission Signal Icon in the upper right corner of the display, it means that the monitor and the display are successfully connected, and the display can display monitoring data in real time, otherwise it may lead to inaccurate display data.❗The cranking voltage is the data of the moment the car starts. So after the test, the data will not change basically, unless the car is restarted. BM200 PRO Transmitter Parameter Input Voltage :6V~25V Working Temperature:-40 °C~80 °C (-40 °F~176 °F) Power Consumption:2.3mA (Average) Radio Frequency :433MHz Display:9 LED Indicators Protection:Short-circuit and Over current Protection BM200 PRO Meter Parameter Lithium Battery Capacity :750mAh Charging Input:Solar Panel Type-C Port (5V) Display:Monochrome LCD with Backlight Protection :Short-circuit and Overcurrent Protection Working Temperature:-20 °C~70 °C (-4 °F~158 °F) Storage Temperature:-30 °C~80 °C (-22 °F~176 °F Package List Ancel BM200 Features 【For 12V battery bank】 Suitable for12V battery bank. Suitble for All 12V Lead-acid Batteries 【 Precise Data】 The displays include battery voltage/current/power and current capacity, remaining time, and volume percent.It has backlight function for monitoring at night. 【Easier to set up】 Simply connect the transmitting end of the detection battery to the car battery 【Programmable Parameters】 BM200 PRO can be show for you the high/low voltage,amperage, temperature,etc. When reach the programmed value,the alarm will be sent out by flashing. 【Package include】 LCD display*1, hall sensor*1, type-c charge cable*1, User Manual*1, Tape*1 Other advantages -Excellent performance, power saving, and easy installation -The display terminal needs to be installed and placed directly in front of the windshield -Before starting or closing the machine, it is necessary to make preparations. The mechanism of vibration is the vibration sensor. Shake the power on for 5 minutes, let it sit for 5 minutes, and then turn it off. -The transmitter has low power consumption and will not deplete the battery. The display screen is equipped with a built-in solar panel, which saves electricity-The data source is based on the scenario of starting type gasoline batteries, applicable to car owners How to use the product? 1.Firmly Attach The Negative Connector To The Negative Battery Terminal. 2.Firmly Attach The Positive Connector To The Positive Battery Terminal. 3.Mount The Device To The Battery Surface With The Supplied Double-Sided Tape.please Wipe The Battery Surface Clean Before Fixing. 4.No Installation Required,Juest Place It In Front Of The Windshield. PaymentShippingTerms of salesAbout usContact usPayment - We accept all common forms of payment such as Credit cards、Debit card ,Google Pay ,Visa etc. - Payment should be made within 7 days after bidding ends. Otherwise a Unpaid Item case will be opened to you. Shipping Will usually ship within 1 business day of receiving cleared payment .（ Excluding weekends and holidays） 1. Ship from USA local warehouse via UPS or USPS shipping . Delivery time varies from 2 to 5 business days (Excluding holidays and weekends) ！ 2. We will ship according to your eBay address. Please make sure it is correct and include phone number for delivery. 3. Ship to HI, PR, AKand other overseas states and other countries requires payment of courier fees. 4. PO.BOX address delivery is not supported. - We are not responsible for buyers’ local taxes & Customs / import tax. If you do not receive your order in the estimated time, please contact us, we would do our best to serve you solve the problem. Terms of sales We are authorize distributor, our all items are 100% original and Our devices have warranty, - 12 months free repair for the devices. - 60 days free return service . - About Free return and get labels . Please click 【Return this item】- select the return reason 【Don’t like it】 or 【Doesn't fit】 to initiate a return, we'll buy the label for you right away , or contact us before you open a return reuest. According to eBay return policy , 100% of the return shipping costs for the above return reasons will be covered by us ! Please contact us firstly when you need warranty service and free return service . In case an item arrives faulty, please contact us in 30 days and keep it unused. We will instruct you on how to return and get refund or replacement. If after 30 days, or the item has been used, we have the right to decline your claim. Items should be returned on buyers’ cost for repair or replacement. About us WHO WE ARE? We are authorize distributor for many manufatcurers. We guarantee all items are 100% original . WHAT WE HAVE? We have over 4 warehouses that are located in US. Fast delivery . WHAT WE SELLING ? We is mainly deals in various types of professional car diagnostics scanners and other car service maintenance tools. For example --- Passenger car scanner , Diesel Commercial scanner ,Motorcycle scanner , Mile-agecorrection tool , Key programming tool , Smoke test , Electrical system probe test ,Battery tester ,injector cleaner etc .Contact us Our customer-oriented service strives for positive feedbacks with all 5 star selling ratings. Please feel free to contact us via eBay message once you have any question before you giving us negative feedback or open case. We will reply in 24 business hours. Business time: GMT8 (9:00-18:00) from Monday to Friday. On Sep 27, 2024 at 12:00:48 PDT, seller added the following information:

Price: 35.99 USD

Location: Houston, Texas

End Time: 2024-12-27T19:59:56.000Z

Shipping Cost: 0 USD